ESEM interface development program for the MD-1366 EBEM now complete and DoD-approved for pending release of MIL-STD-188-165B and STANAG 4486 ed. 3 standards

Carlsbad, CA – ViaSat (Nasdaq:VSAT) is offering a new Ethernet Service Expansion Module (ESEM) baseband interface for the MD-1366 Enhanced Bandwidth Efficient Modem (EBEM) that promotes Frequency Division Multiple Access (FDMA) modem interoperability across Department of Defense (DoD) satellite networks and adds new feature updates as well. Having successfully completed first article testing, the ESEM option adds an open-standard Ethernet interface to the EBEM standards-based modem. This latest enhancement to the field-proven MD-1366 extends FDMA modem capability far beyond traditional fixed-channel, serial interface operation and is certified for use over Defense Satellite Communication System and Wideband Global Satcom military satellites. U.S. Army, Navy, Marine, and Air Force customers have recently ordered approximately $2 million worth of MD-1366 modems equipped with the ESEM interface.

The ESEM plug-in interface enables Ethernet baseband data (10/100/1000 BaseT) interoperability among DoD FDMA modems by concurrently transmitting Internet Protocol (IPv4 or IPv6) Ethernet baseband traffic as well as non-IP data flows. The ESEM, together with the Information Throughput Adaptation and Radio Aware Routing features of the MD-1366, moves beyond the traditional “fixed channel data rate” environment of FDMA communications to automatically maximize data throughput. When environmental conditions deteriorate, the modem switches to a more robust modulation and coding scheme to maintain the connection. In traditional fixed-channel military satellite communication environments where a 3-4 dB link margin is typical, the features can provide more than a 100% improvement in data throughput.

“Our warfighters can benefit from far greater bandwidth efficiency and data throughput optimization, which will lead to a significant decrease in the cost-per-bit of FDMA-based satellite communications,” said Phil Chacon, business director of the ViaSat C4I Satcom group. “We’re excited to deliver these improvements to those who need bandwidth efficiency and interoperability the most.”

The MD-1366 EBEM is the result of a U.S. government program to create an efficient, open-standards based FDMA modem waveform (per DoDI 4630.09) in accordance with DoD policy for transmission of IP over DoD-owned satellite communication systems. The modem is the most widely adopted DoD FDMA modem since the OM-73, one of the legacy and proprietary serial modems it was designed to replace. The MD-1366 supports direct interoperability between users, maximizes bandwidth–on-demand efficiencies, and enables the DoD to buy product from multiple vendors. The MD-1366 implements many advanced features based on the updated standards, including the following:

• Transmission Security (TRANSEC) certified to FIPS 140-2, Level 2
• 16APSK modulation
• Automatic Uplink Power Control (AUPC)
• Distant-end monitoring
• Serial and Ethernet baseband data multiplexing

ViaSat has delivered over 3,000 MD-1366 modems to the DoD and is now in full rate production and delivery of ESEMs. For more information or to purchase these products, email gov.satcom@viasat.com.

Safe Harbor Statement

Portions of this release, particularly statements about the performance of the ViaSat ESEM product and EBEM modems, may contain forward-looking statements regarding future events and are subject to risks and uncertainties. ViaSat wishes to caution you that there are some factors that could cause actual results to differ materially, including but not limited to: contractual problems, product defects, manufacturing issues or delays, regulatory issues, technologies not being developed according to anticipated schedules, or that do not perform according to expectations; and increased competition and other factors affecting the telecommunications industry generally. The Company refers you to the documents it files from time to time with the Securities and Exchange Commission, specifically the section titled Risk Factors in the Company's Form 10-K, which contain and identify other important factors that could cause actual results to differ materially from those contained in our projections or forward-looking statements. Stockholders and other readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date on which they are made. We undertake no obligation to update publicly or revise any forward-looking statements.

Comsat Labs and Comsat Laboratories are tradenames of ViaSat, Inc. Neither Comsat Labs nor Comsat Laboratories is affiliated with COMSAT Corporation. “Comsat” is a registered trademark of COMSAT Corporation. All additional products are trademarks of their respective owners.

« Back to news archive